Chip Floor System – Full Flake (Sku : CFS)

MSRP:
Was:
Now: $0.00
(You save )
(No reviews yet) Write a Review
Shipping:
Calculated at Checkout

Chip Floor System

  • High-Build 4 layer system
  • Partial ceramic 100% solids body coat
  • “To rejection” flake, or quartz, distribution
  • Optional 100% U.V. stability
  • Unlimited range of colors
  • Extreme durability

 

 

Our most durable non-solid color floor system, the Chip Floor is highly customizable due to the wide range of DecoFlake colors and styles. Utilizing the same epoxy components as our 3 Layer System with the addition of an optional DecoFX 1110 clear epoxy flood coat. You can substitute the DecoFX flood coat with an additional coat of EnduraShield 2254 for 100%  U.V. color stability. Quartz and other broadcast media are available just inquire with us directly for information. For the ultimate in durability and appearance consider multiple material broadcasts and flood coats.

Our Chip Floor System consists of Wolverine Coatings' 100% solids, BondTite 1101 primer, LiquaTile 1184 pigmented body coat, DecoFlake colored vinyl chips, DecoFX 1110 clear epoxy flood coat, and EnduraShield 2254 hybrid-urethane clear coat. The Chip Floor System offers a highly customizable color palette with 18 LiquaTile colors and a wide assortment of DecoFlake colors and blends.

This system begins with Wolverine Coatings’ two component 100% solids BondTite 1101 primer. Minimum recommended quantity is 5 mils / 304sf (square feet) per gallon. For increased performance or when floor surfaces that are rough, extremely porous or have had significant repairs consider increasing the quantity.

LiquaTile 1184 is the heart of this system. Based on Wolverine Coatings’ Advanced Hybrid Cycloaliphatic technology, formulated with ceramic content, the self-leveling LiquaTile 1184 is extremely hard – yet flexible. Its flexibility provides excellent impact resistance by absorbing and redistributing impact energy while, at the same time offering best-in-class U.V., and abrasion resistance. Available in 18 colors. Minimum recommended thickness is 12mils / 127sf per gallon. LiquaTile 1184 is an advanced 100% solids epoxy to ensure maximum performance and highest value.  No compromises here.

Available in a wide variety of colors, the optional DecoFlakes are decorative vinyl chips which are broadcast into the LiquaTile 1184 coat. Select a pre-blended color assortment or create your own from our collection of individual solid colors.  For “full rejection” distribution, DecoFlakes are broadcast at a rate of .15lbs per square foot.

The “full rejection” broadcast of DecoFlakes will create lots of voids and cavities within the DecoFlake layer. To ensure proper performance of the final EnduraShield 2254 urethane clear coat these need to be filled. The best product to fill the gaps is our DecoFX 1110 clear epoxy. For those looking for the stippled look and feel our Minimum Recommended quantity is 10mil / 152sf per gallon. For a smoother appearance consider increasing this coating to a minimum of 25mils / 61sf per gallon.

A 95% solids two-component hybrid-urethane clear coat, EnduraShield 2254 cures to a crystal clear, UV and scratch resistant, high gloss finish. Due to the high gloss finish we highly recommend Wolverine Coatings’ SpheriTex traction additive for additional slip resistance and/or where a matte finish is desired. Minimum recommended thickness is 4 mils / 360sf per gallon (DO NOT exceed 7 mils per coat). For additional abrasion resistance apply additional coats.

Combined into the EnduraShield 2254 clear coat SpheriTex 110 is comprised of a spherical glass aggregate which results in a slip-resistant, non-abrasive, easily cleaned non-abrasive finish. The SpheriTex virtually disappears when viewed from above but will add a glare-free matte finish when viewed on the horizon.

When comparing Wolverine Coatings’ systems to our competitors pay careful attention to price relative to Gallons and Total DFT (Dry Film Thickness). Our competitors “kit” prices may be cheaper but when you consider and compare the overall quantities of materials offered you will often find our prices are much better on a dollar per gallon, or dollar per mil basis. Factor in the superior quality of Wolverine Coatings’ products, competitive dollar per gallon/mil pricing, combined with excellent customer service and the choice is obvious. Our recommended minimum quantities are all based on theoretical Dry Film Finished Thickness (DFT). This represents the thickness of the cured coating. Because all our epoxies are 100% solids there is no shrinkage, what you purchase and apply onto your floor is what you will end up with. No solvents to evaporate, little to no VOCs to pollute the air.

Made in the U.S.A. – All Wolverine Coatings products are manufactured with great pride in South Carolina.

  • 100% solids epoxy coating.
  • Semi-ceramic technolgoy for added wear and impact resistance.
  • Meets LEED EQ 4.2 (Independent Laboratory Validation).
  • Meets requirements for FDA & USDA inspected facilities.

Specification

Brand Wolverine Coatings
Volume Solids 100%
V.O.C. Content None
Available Packaging 3 quart / 3 gallon
Finish High Gloss
Color Fastness Highly resistant
Country of Manufacture U.S.A.

Additional Details

SKU:
CFS
BondTite-3 qt:
BT11013qk-H,BT11013qt-R
BondTite-3 gal:
BT1101-3gal-R,BT1101-3gal-H
LiquaTile-3 qt_tier-1:
LT1184-3qt-R-1,LT1184-3qt-H-1
LiquaTile-3 qt_tier-2:
LT1184-3qt-R-2,LT1184-3qt-H-2
LiquaTile-3 qt_tier-3:
LT1184-3qt-R-3,LT1184-3qt-H-3
LiquaTile-3 gal_tier-1:
LT1184-3gal-R-1,LT1184-3gal-H-1
LiquaTile-3 gal_tier-2:
LT1184-3gal-R-2,LT1184-3gal-H-2
LiquaTile-3 gal_tier-3:
LT1184-3gal-R-3,LT1184-3gal-H-3
EnduraShield-0.625:
ES2254-.625gal-R,ES2254-.625gal-H
EnduraShield-1.25:
ES2254-1.25gal-R,ES2254-1.25gal-H
Traction Additive:
ST110-43
DecoFX-1-gal:
DFX1110-1-H,DFX1110-1-R
DecoFX-4-gal:
DFX1110-4-H,DFX1110-4-R
Decoflake_color:
DAKOTA_blend,GRAVEL_blend,WOMBAT_blend,LIGHTHOUSE_blend,SHORELINE_blend,SONOMA_blend,CANYON_blend,RAINSTORM_blend,BASIL_blend,BRIAR_blend,BUCKY_blend,ORBIT_blend,WHITE_solid,SCONE_solid,AUTUMN-BROWN_solid,
Decoflake_color:
CHOCOLATE_solid,COCOABROWN_solid,IVORY_solid,JASPER_solid,HUNTER-GREEN_solid,BURGUNDY_solid,BLACK_solid,WHISPERGRAY_solid,GRANITE_solid,CHARCOAL_solid,MEDIUMGRAY_solid,GRAPHITE_solid,YELLOW_solid,ORANGE_solid,RED_solid,POWDERBLUE_solid,TRUEBLUE_solid
PRD_PDF:
TDS||http://www.wolverinecoatings.com/TDS/LiquaTile_1184-TDS.pdf
PRD_PDF:
SDS Part A||http://www.wolverinecoatings.com/SDS/LiquaTile_1184_A_Resin-SDS.pdf
PRD_PDF:
SDS Part B||http://www.wolverinecoatings.com/SDS/LiquaTile_1184_UVR_B_Hardener-SDS.pdf
PRD_PDF:
Application Instructions||https://store-t5andvsj5y.mybigcommerce.com/content/TechNotes/ChipFloor_AI.pdf
x

For this project size please contact us directly by email at [email protected]

Related Products