VCT Solution (Sku : VCT)

VCT Solution

• 2 layer clear epoxy and hybrid-urethane system
• Eliminate endless VCT Strip & Wax chore. Forever!
• Super Durable, Deep Hi-Gloss finish
• Restore older VCT floors or apply finishing touch to new
• Super versatile, use on stamped/stained concrete
• Kitchen / Bar counter tops, Arts & Crafts projects

The combination of DecoFX 1110 and EnduraShield 2254 are the ideal coatings to protect and enhance your VCT floor! They cure to a durable, attractive, glossy surface with outstanding chemical, corrosion, abrasion, and impact resistance. VCT, whether brand new or old and worn, is transformed into a beautifully finished, seamless floor that's easy to clean and maintain. NO more stripping and waxing… Ever!

A two component clear epoxy designed for superior adhesion and U.V. stability. Recommended minimum quantity is 10mil / 152sf per gallon. When applied to properly prepared Vinyl Composite Tiles the DecoFX 1110 provides for outstanding impact resistance and a deep gloss finish. For floors with gaps, dings and dents consider increasing DecoFX 1110 quantities.

A 95% solids two-component hybrid-urethane clear coat, EnduraShield 2254 cures to a crystal clear, UV and scratch resistant, high gloss finish. Due to the high gloss finish we highly recommend Wolverine Coatings’ SpheriTex traction additive for additional slip resistance and/or where a matte finish is desired. Minimum recommended thickness is 4 mils / 360sf per gallon (DO NOT exceed 7 mils per coat). For additional abrasion resistance apply additional coats.

Combined into the EnduraShield 2254 clear coat SpheriTex 110 is comprised of a spherical glass aggregate which results in a slip-resistant, non-abrasive, easily cleaned non-abrasive finish. The SpheriTex virtually disappears when viewed from above but will add a glare-free matte finish when viewed on the horizon.

When comparing Wolverine Coatings’ systems to our competitors pay careful attention to price relative to Gallons and Total DFT. Our competitors “kit” prices may be cheaper but when you consider and compare the overall quantities of materials offered you will often find our prices are much better on a dollar per gallon, or dollar per mil basis. When you then consider the superior quality of Wolverine Coatings’ products combined with our competitive dollar per gallon/mil the choice is obvious. Our recommended minimum quantities are all based on theoretical Dry Film Finished Thickness (DFT). This represents the thickness of the cured coating. Because all our epoxies are 100% solids there is no shrinkage, what you purchase and apply onto your floor is what you will end up with. No solvents to evaporate, little to no VOCs to pollute the air.

Made in the U.S.A. – All Wolverine Coatings products are manufactured with great pride in South Carolina.